RTPI

The majority of our shelter ranges can accommodate Real Time Passenger Information (RTPI) screens. At Queensbury Shelters we work closely with system providers to ensure our shelters are compatible with these displays and that they can be easily installed and maintained.

As a general rule a shelter should have headroom clearance of 2.1m underneath the RTPI unit. Some of our shelter ranges are available at a single height with sufficient clearance to accept RTPI (whether fitted or not). Our other shelter ranges are available in two different heights:

  1. Standard Height (no RTPI to be fitted)
  2. RTPI Height

If an RTPI shelter is required, the shelter can be supplied either RTPI ready or future proofed for displays fitted at a later date:

  1. RTPI Compatible
    Designed to have an RTPI display fitted in the future. The specific bracket to suit the RTPI unit is not supplied.
  2. RTPI Ready
    Supplied with a bracket and ready to have the RTPI unit fitted immediately.

In all cases RTPI signs will be supplied by others.

Details of both options are outlined below. The Arun and Meridian shelters are used here as examples:

MERIDIAN
Shelter Version Standard
RTPI Compatible RTPI Ready
What’s included – feeder pillar with separate RTPI circuit & RCBO
– internal circuit/cabling
– RTI bracket NOT included
– feeder pillar with separate RTPI circuit & RCBO
– internal circuit/cabling
– RTI bracket included
ARUN
Shelter Version Standard RTPI
RTPI Compatible RTPI Ready
What’s included – No RTPI – added shelter height
– feeder pillar with separate RTPI circuit & RCBO
– internal circuit/cabling
– RTI bracket NOT included
– added shelter height
– feeder pillar with separate RTPI circuit & RCBO
– internal circuit/cabling
– RTI bracket included

For shelters located on or in close proximity to a cycle lane, the recommended clearance to the bottom of the RTPI unit is 2.3m. Please call our sales team to discuss the options available.

We can also incorporate large format interactive displays into our shelters. Please contact our sales team to discuss your requirements.